Timber Floor Repairs Sydney

We repair and maintain timber floors across Sydney, sourcing selected and recycled timber to blend with your sanding and polishing.

Any Quote Beat Guaranteed

Get Your FREE Quote

    Timber Floor Repairs Sydney | Free Quote | Advance Floors
    Over a Decade of Experience
    Recycled Matched Timber
    Repair + Sand + Polish in One Job
    Any Quote Beat Guaranteed
    Free On-Site Quote
    Heritage Species Matching
    Sydney Wide Service
    Over a Decade of Experience
    Recycled Matched Timber
    Repair + Sand + Polish in One Job
    Any Quote Beat Guaranteed
    Free On-Site Quote
    Heritage Species Matching
    Sydney Wide Service

    Timber Floor Repairs Sydney

    Expert repair, sand and polish in one job — matched timber, fixed price, Sydney wide.

    Advance Floors specialises in timber floor repairs across Sydney. We restore cracked boards, termite-damaged sections, water-cupped floorboards, renovation gaps left by wall removals, and surface damage using recycled and matched timber. Most damaged timber floors can be repaired without replacing the whole floor. We assess the damage on-site, source timber matched to your existing boards in species, width and grain, carry out the repair, then sand and polish the area back into the surrounding floor so the result is seamless. Over a decade of experience. Free on-site quote. Any competitor quote beaten: 1300 928 584.

    10+
    Years repairing timber floors across Sydney
    $200
    Starting price for spot board repairs
    1
    Job covers repair, sand and polish together

    Can Your Floor Be Repaired?

    In almost every case, yes. Full replacement is the last resort, not the first response. Filter by your damage type below.

    Damage TypeOur ApproachNeed to Vacate?Timeframe
    Cracked or split boardsFill hairlines; replace split boards individually with matched timberNo1 day
    Termite-damaged boardsRemove affected boards, check structural timbers beneath, replace with recycled matched timberUsually not1–2 days
    Water-cupped or swollen boardsSand flat if subfloor is dry; replace boards if beyond sanding toleranceNo1–2 days
    Renovation gaps (walls, doorways)Fill with species-matched timber nailed to existing joistsRoom needs to be clear1–2 days
    Gap where fireplace was removedFill with matched timber replicating original board run directionNo1 day
    Wide persistent gaps between boardsFill or replace boards depending on cause; assessed on-siteNo1 day
    Surface scratches and scuffsSpot sand and recoat; no board replacement neededNoHalf to 1 day
    The key question is always the subfloor. If the structure beneath is sound, almost any surface or board-level damage can be fixed without touching the rest of the floor. We check it as part of every free on-site inspection.

    What We Repair

    Every repair type handled from assessment through to final finish. No subcontractors, no handoffs.

    Structural Repairs
    1
    Act immediately

    Termite & White Ant Damage

    By the time a board feels soft underfoot, the damage below has been spreading for months. We remove affected boards, check structural timbers beneath, source recycled matched timber and replace before integrating the sanding and finish. We will not cover over a structural problem.

    • Soft or spongy feeling underfoot
    • Hollow sound when tapping boards
    • Fine powder or sawdust near skirtings
    • Bubbling or raised sections
    2
    Board replacement

    Renovation Gaps

    Wall removals, new doorways, kitchen reconfigurations — all leave a gap where boards used to run. New boards must land on existing joists, run in the original direction, and match timber that may be 50 years old. We use reclaimed stock specifically because new timber will not match an aged floor.

    If the renovation also involved flooring removal, see our carpet removal and tile removal services.

    3
    Board replacement

    Water & Moisture Damage

    Water damage causes boards to cup, swell and darken. The moisture source must be resolved and the subfloor moisture-tested before we touch the floor.

    Cupped boards that are structurally sound are often recoverable by sanding flat — a fraction of the cost of replacement. Where boards are beyond recovery, we replace and integrate with the surrounding floor.

    Cosmetic & Surface
    4
    Fill & refinish

    Cracked & Split Boards

    Sydney’s climate cycles — dry summers, humid winters — crack older hardwoods over time. Blackbutt, Spotted Gum, Tallowwood, Ironbark and Brush Box are all susceptible after decades of seasonal movement.

    Hairline cracks are filled with a species-matched compound and refinished. Boards with structural splits are replaced individually without disturbing surrounding boards.

    5
    Spot repair

    Surface Scratches, Scuffs & Dents

    Light scuffsSpot sand & recoat2–4 hrs
    Deep scratchesFill, sand, recoatHalf day
    Gouges or dentsFill or spot replaceHalf–1 day
    Heavy wearSand & refinish area1–2 days
    6
    Heritage specialist

    Heritage & Federation Floors

    Heritage homes carry Australian hardwood species — Tallowwood, Ironbark, Brush Box — that are no longer milled in original widths and grades. Standard repair stock will not match.

    We source reclaimed timber from Sydney demolitions to match grain, colour and width as closely as possible. We have completed repairs across Federation terraces, Edwardian semis and inter-war period homes throughout the inner suburbs and North Shore.

    How Much Does Timber Floor Repair Cost?

    Every repair is different. The cost depends on the extent of the damage, the timber species, board width, and whether sanding and polishing is needed to integrate the repair. No two jobs quote the same way from a phone call. That is why we come to you first.

    Fixed written quote

    You receive a written quote before any work begins. The scope is fixed. No variations, no extras discovered mid-job.

    On-site in 20–40 minutes

    We assess the damage in person, check the subfloor and identify the timber species before any number is put on paper.

    Any quote beat guaranteed

    Get a written quote from a competitor for the same scope of work and we will beat it.

    Free — no obligation

    The measure and quote is completely free. No call-out fee, no commitment required before you see a number.

    Get Your Free On-Site Quote

    We come to you, assess the damage, and give you a fixed written price. Call or request a quote online.

    Call 1300 928 584

    From First Call to Finished Floor

    Six steps. One team. No handoffs.

    1
    On-Site
    Inspection
    We come to you
    2
    Fixed Written
    Quote
    Locked scope
    3
    Timber
    Matching
    Recycled & reclaimed
    4
    Board
    Repair
    Precise removal & fit
    5
    Sanding &
    Integration
    No visible seam
    6
    Finish &
    Hand Over
    Ready to walk on
    1
    Free On-Site Inspection

    We come to you — no photos, no guesswork from a phone call. One of our specialists visits your home, assesses the damage by eye and by hand, and checks the subfloor condition beneath the affected area. We identify the timber species, measure the boards, and note the existing finish type and sheen level. This takes 20 to 40 minutes and tells us everything we need to give you an accurate, locked quote. Most clients are surprised by how quickly we can diagnose a problem that has been bothering them for months.

    Free of charge, no obligation to proceed

    What Sets Us Apart

    Most floor repairers sand first and ask questions later. We do the opposite.

    10+ Years on Sydney floors

    Federation terraces in Paddington, post-war weatherboards on the North Shore, modern builds in the Hills District. We have repaired every era of Sydney residential flooring.

    One job. Not three.

    Repair, sanding and polishing done together in a single booking. No separate tradespeople, no visible seam between the repair and the finish. One team, one result.

    We source recycled timber. Most don't.

    Your floor has aged for decades. New stock will not match it. We source reclaimed Tallowwood, Ironbark, Brush Box and Blackbutt specifically so repairs disappear into the surrounding floor rather than standing out.

    Fixed price. No surprises.

    You get a written quote before we touch anything. The scope is locked. If we find something we did not expect, we tell you before we proceed — not after we have already done the work.

    Any Quote Beat Guaranteed
    Bring us a written quote from a competitor for the same scope. We will beat it.
    1300 928 584

    What to Ask Any Timber Floor Repairer

    Most homeowners do not know what questions to ask before booking a repairer. Use this as your checklist.

    Question to AskAdvance FloorsTypical Competitor
    Do you source recycled timber for matching? Yes — reclaimed timber sourced for aged floors Rarely offered
    Do you do repair, sanding and polish as one job? Yes — always integrated Often separate bookings
    Is the quote fixed or an estimate? Fixed written quote Estimates that shift
    Do you check the subfloor during inspection? Yes, every inspection Varies by operator
    Do you quote on-site rather than from photos? Always on-site Often phone-based

    Frequently Asked Questions

    Spot repairs covering 1 to 3 boards typically cost $200 to $600, including matched timber, fitting and finishing. Larger jobs involving significant board replacement and a full sand and polish range from $600 to $2,000 or more depending on extent, species and subfloor condition. We provide a free on-site written quote before any work starts.
    Yes. In almost every case, full floor replacement is unnecessary. We replace only the damaged boards. The surrounding floor is not touched. The repaired area is then sanded and finished to blend seamlessly with the rest of the floor.
    A repair that is sanded and finished together with the surrounding floor is very difficult to spot. The outcome depends on how closely the new timber matches the aged original. We show you the timber match before starting. If the match is not close enough, we tell you before we begin, not after.
    Spot repairs take half a day to one day. Multi-board repairs with sanding and finishing take one to two days. Larger jobs such as full renovation gap fills allow two to three days for finish coats to cure properly between applications.
    Usually not. Squeaking and springing underfoot indicates a subfloor problem: loose, rotten or termite-damaged joists or bearers beneath the surface. We inspect the subfloor during every assessment. Where structural subfloor work is needed, we refer it to the appropriate specialist and can carry out the surface repair once that work is complete.
    Yes, and it is work we particularly value. Heritage homes typically have Australian hardwood species no longer milled in the original widths and grades. We source reclaimed matching timber specifically for this work and have experience across Federation, Edwardian and inter-war period homes throughout Sydney's inner suburbs and North Shore.
    Our primary work is solid hardwood. For engineered floors, whether repair or replacement makes more sense depends on the wear layer thickness and extent of damage. We assess each case honestly and tell you which path gives you the better long-term result.
    Surface scuffs and minor scratches can be touched up with hardware store products. Anything involving board replacement runs into the matching problem: your floor has been ageing for years and its colour has shifted with time and UV exposure. A new board or spot finish will stand out against a floor that has aged for decades. Professional matching, sanding and blending is what makes a repair genuinely invisible.

    Explore More

    Related Services

    Other services from Advance Floors that work alongside a repair.

    Get Your Free Measure and Quote

    Our professionals can quickly and easily install this durable and classic flooring. We'll beat any competitor quote! Contact us today for your free measure and quote.

    1300 928 584

    Contact us today at 1300 928 584!

    Get Your Free Quote
    Any Quote Beat Guaranteed

    Get Your FREE Quote

      Call 1300 928 584